“MASTER GUARD”

SMOOTH FINISH - White Cement Based Putty

MASTER GUARD is a White Cement Based Wall Putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting.  As it is white, it can be treated as a base coat for painting.  It is lime-free.  It contains minerals, white cement and polymers.

APPLICATION DATA

Dampen the surface to be plastered with clean water.  Allow excess water to drain off.  Using a steel trowel/blade, apply the above mix to a thickness of about 1-2mm.  Level and smoothen the surface.  Apply the second coat after the first coat has fully dried and set. The thickness of each coat should not exceed 2mm and total plaster thickness should not exceed 3mm. Smoothen with a steel trowel.  Sand paper if so desired.

Surfaces preparation:

Clean loose particles, dirt, grease and traces of foreign material from the surface, if necessary, by using sand paper, or by chipping.  For loose plaster areas, remove the defective material and re-plaster the area.  For ceilings/walls, which are not even, re-plaster it to make them even.  Fill up any cracks in base plaster.

APPLICATION METHOD

Dampen the surface to be plastered with clean water.  Allow excess water to drain off.  Using a steel trowel/blade, apply the above mix to a thickness of about 1.5mm.  Level and smoothen the surface.  Apply the second coat after the first coat has fully dried and set. The thickness of each coat should not exceed 2mm and total plaster thickness should not exceed 3mm. Smoothen with a steel trowel.  Sand paper if so desired.

PRODUCT DATA

Finishing: MASTER GUARD gives smooth finish and serves as ideal substrate for applications paints. 

 

Features:

Excellent bonding to the base plaster/concrete.  Scratch resistant.  UV resistant.  Water resistant.  Reduction in cracking.  Can be used on new as well as old walls/ceiling. 

Benefits: 

Reduced paint consumption.  Saves time.  Cost effective. 

Covering Capacity:

6- 8 sq. ft. per Kg., could vary according to surface condition.

Product Data:

Smooth

Packs: 

1, 5, 20, 30 & 40KG